Mkäköhän on kun vb sanoo "Type mismatch" tummennetusta kohdasta?
Public Function GetHit() Dim mouseyx(9) As POINTAPI Dim I As Long For I = 0 To 9 [b]mouseyx(I) = [/b]FindBitmapMask(stat(I), SelWnd, 5, 8, 647, 206, 654, 216, 0) Select Case mouseyx(I).x Case Is <> -1: Number = I End Select Next I For I = 0 To 9 mouseyx(I) = FindBitmapMask(stat(I), SelWnd, 5, 8, 655, 209, 663, 220, 0) Select Case mouseyx(I).x Case Is <> -1: number2 = I End Select Next I If number2 = 0 And mouseyx(0).x < 0 Then number2 = "" GetHit = Number & number2 End Function
Yrittäkää edes arvata mikä on ongelma. :D
Onko funktion FindBitmapMask palautusarvon tyyppi POINTAPI?
...tai onko stat():n arvo numeerinen koko välillä 0-9?
En oikein ymmärtänyt. Mitä tuo virhe on suomeksi?
Haittaako jos monessa moduulissa ja yhdessä formissa on "Public/private type POINTAPI tjsp. jne." ?
Tuo GetHit toimii toisessa projektissa.
Voin lähettää nuo funktiot kun pääsen kotiin.
Eli:
Public Function FindBitmapMask( ... ) As POINTAPI
Onko tämä POINTAPI, kuten yllä?
Lisäksi stat pitäisi olla ilmeisesti Long. Tarkista että se on.
Type Mismatch tulee silloin, kun yrittää syöttää väärää muuttujatyyppiä jonnekin, minne se ei kelpaa. VB6 tosin yrittää monissa eri tapauksissa pakottaa muuttujan oikeaan muotoon, mutta se ei aina onnistu, näin esimerkiksi UDT:tä käytettäessä (User Defined Type, POINTAPI on tällainen). Yleensä kuitenkin on hyvä välttää muuttujatyyppipakottaminen ja muuntaa muuttujat muodosta toiseen esim. CLng, CStr jne. funktioiden avulla.
En voi editoida edellistä viestiä joten tässä funktiot (tulee vähän pitkä viesti):
'***Class Moduulissa*** Sub RunSIfHPU(Hitpoints As Long) Dim Randi7 As Integer Dim Randi8 As Integer Dim Randi11 As Integer Randomize Form1.MMSetCursor 585, 187 WaitMs (Int(Rnd * 100) + 10) Randomize Randi11 = Int(Rnd * 50) + 10 WaitMs (Randi11) LeftClick WaitMs (Randi11 * 0.5) Form1.GetHP If Form1.GetHP <= (Hitpoints) Then GoSouth Randomize Randi8 = Int(Rnd * 50) + 10 WaitMs (Randi8) SetRun WaitMs (Randi8) OpenInv End If End Sub
'***MODUULI***
Public Declare Function GetPixel Lib "gdi32" (ByVal hDC As Long, ByVal X As Long, ByVal Y As Long) As Long
Public Declare Function SetCursorPos Lib "user32" (ByVal X As Long, ByVal Y As Long) As Long
Public Declare Function CreateCompatibleDC Lib "gdi32" (ByVal hDC As Long) As Long
Public Declare Function GetDC Lib "user32" (ByVal hwnd As Long) As Long
Public Declare Function SelectObject Lib "gdi32" (ByVal hDC As Long, ByVal hObject As Long) As Long
Public Declare Function GetWindowRect Lib "user32" (ByVal hwnd As Long, lpRect As RECT) As Long
Public Declare Function SetPixel Lib "gdi32" (ByVal hDC As Long, ByVal X As Long, ByVal Y As Long, ByVal crColor As Long) As Long
Public Type RECT
Left As Long
Top As Long
Right As Long
Bottom As Long
End Type
Public Type POINTAPI
X As Long
Y As Long
End Type
Public Function FindBitmapMask(SBitmapDC As Long, SelWnd As Long, Width As Long, Height As Long, posx1 As Long, posy1 As Long, posx2 As Long, posy2 As Long, MaskColor As Long) As POINTAPI
Dim X As Long, X2 As Long, Y As Long, Y2 As Long, tmpPixel1 As Long, tmpPixel2 As Long, PBitmapDC As Long, mouseyx As POINTAPI, FirstPixel As Long, FirstPoint As POINTAPI
PBitmapDC = GetDC(SelWnd)
For Y = 0 To Height - 1
For X = 0 To Width - 1
tmpPixel1 = GetPixel(SBitmapDC, X, Y)
If tmpPixel1 <> MaskColor Then
FirstPixel = tmpPixel1
FirstPoint.X = X
FirstPoint.Y = Y
GoTo Coolz0rz
End If
Next X
Next Y
Coolz0rz:
For Y = posy1 To posy2
For X = posx1 To posx2
tmpPixel1 = GetPixel(PBitmapDC, X, Y)
If tmpPixel1 = FirstPixel Then
For Y2 = Y - FirstPoint.Y To Y + Height - 1 - FirstPoint.Y 'Image1 is the quick and lazy way
For X2 = X - FirstPoint.X To X + Width - 1 - FirstPoint.X ' to get height and width, lol
tmpPixel1 = GetPixel(PBitmapDC, X2, Y2)
tmpPixel2 = GetPixel(SBitmapDC, X2 - (X - FirstPoint.X), Y2 - (Y - FirstPoint.Y))
If tmpPixel2 <> MaskColor Then
If tmpPixel1 <> tmpPixel2 Then GoTo NextX
End If
'SetPixel Form1.Picture2.hdc, x2, y2, 300000
Next X2
Next Y2
mouseyx.X = X - FirstPoint.X
mouseyx.Y = Y - FirstPoint.Y
FindBitmapMask = mouseyx
Exit Function
End If
NextX:
Next X
NextY:
Next Y
mouseyx.X = -1
FindBitmapMask = mouseyx
End Function
Public Function LoadGraphicDC(sFilename As String) As Long
On Error Resume Next
Dim LoadGraphicDCTEMP As Long, tmpObject As Long
LoadGraphicDCTEMP = CreateCompatibleDC(GetDC(0))
SelectObject LoadGraphicDCTEMP, LoadPicture(sFilename)
LoadGraphicDC = LoadGraphicDCTEMP
End Function'***MODUULI***
Public Declare Function SendMessage Lib "user32" Alias "SendMessageA" (ByVal hwnd As Long, ByVal wMsg As Long, ByVal wParam As Long, lParam As Any) As Long
Public Const WM_CLOSE = &H10
Public Declare Function timeGetTime Lib "winmm.dll" () As Long
Public Declare Function SetCursorPos Lib "user32" (ByVal X As Long, ByVal Y As Long) As Long
Public Declare Function GetPixel Lib "gdi32" (ByVal hDC As Long, ByVal X As Long, ByVal Y As Long) As Long
Public Declare Function GetCursorPos Lib "user32" (lpPoint As POINTAPI) As Long
Public Type POINTAPI
X As Long
Y As Long
End Type
Public Sub Wait(TimeOut As Long)
Dim TimeNow As Long
TimeNow = timeGetTime()
Do
DoEvents
Loop While TimeNow + TimeOut > timeGetTime()
End Sub
Public Function Rand(ByVal Low As Long, ByVal High As Long) As Long
Randomize
Rand = Int((High - Low + 1) * Rnd) + Low
End Function
Public Function MouseMoveSmooths(DestinationPointX, DestinationPointY As Long)
Dim POINT As POINTAPI
Dim X, Y, StartPointX, StartPointY
GetCursorPos POINT
StartPointX = POINT.X
StartPointY = POINT.Y
X = StartPointX - DestinationPointX
Y = StartPointY - DestinationPointY
Do Until X = 0 And Y = 0
DoEvents
GetCursorPos POINT
DoEvents
If X > 0 Then
X = X - 1
POINT.X = POINT.X - 1
ElseIf X < 0 Then
X = X + 1
POINT.X = POINT.X + 1
End If
If Y > 0 Then
Y = Y - 1
POINT.Y = POINT.Y - 1
ElseIf Y < 0 Then
Y = Y + 1
POINT.Y = POINT.Y + 1
End If
Dim randi2 As Integer
Randomize
randi2 = Int((Rnd * 15) + 2)
Wait (randi2 / 10)
DoEvents
SetCursorPos POINT.X, POINT.Y
DoEvents
Loop
End Function'***Form1:sestä 2 funktiota***
Option Explicit
Public cScript As New clscScript
Public CommentColor As Long
Public StringColor As Long
Public KeysColor As Long
Public SetupKeys As Boolean
Public LoginPacket As Boolean
Public Pause As Boolean
Private Declare Function SaveDC Lib "gdi32" (ByVal hDC As Long) As Long
Private Declare Function GetWindowDC Lib "user32" (ByVal hwnd As Long) As Long
Private Declare Function Getasynckeystate Lib "user32" Alias "GetAsyncKeyState" (ByVal VKEY As Long) As Integer
Private Declare Function CreateRectRgn Lib "gdi32" (ByVal X1 As Long, ByVal Y1 As Long, ByVal X2 As Long, ByVal Y2 As Long) As Long
Private Declare Function CombineRgn Lib "gdi32" (ByVal hDestRgn As Long, ByVal hSrcRgn1 As Long, ByVal hSrcRgn2 As Long, ByVal nCombineMode As Long) As Long
Private Declare Function SetWindowRgn Lib "user32" (ByVal hwnd As Long, ByVal hRGN As Long, ByVal bRedraw As Long) As Long
Private Declare Function DeleteObject Lib "gdi32" (ByVal hObject As Long) As Long
Private Declare Function GetObject Lib "gdi32" Alias "GetObjectA" (ByVal hObject As Long, ByVal nCount As Long, lpObject As Any) As Long
Private Declare Function GetDIBits Lib "gdi32" (ByVal aHDC As Long, ByVal hBitmap As Long, ByVal nStartScan As Long, ByVal nNumScans As Long, lpBits As Any, lpbi As BITMAPINFO, ByVal wUsage As Long) As Long
Private Declare Function ReleaseCapture Lib "user32" () As Long
Private Declare Function SendMessage Lib "user32" Alias "SendMessageA" (ByVal hwnd As Long, ByVal wMsg As Long, ByVal wParam As Long, lParam As Any) As Long
Private Declare Function GetCursorPos Lib "user32" (lpPoint As POINTAPI) As Long
Private Declare Function GetDC Lib "user32" (ByVal hwnd As Long) As Long
Private Declare Function GetPixel Lib "gdi32" (ByVal hDC As Long, ByVal X As Long, ByVal Y As Long) As Long
Private Declare Function WindowFromPoint Lib "user32" (ByVal xPoint As Long, ByVal yPoint As Long) As Long
Private Declare Function SetWindowPos Lib "user32" (ByVal hwnd As Long, ByVal hWndInsertAfter As Long, ByVal X As Long, ByVal Y As Long, ByVal cx As Long, ByVal cy As Long, ByVal wFlags As Long) As Long
Private Declare Function GetWindowRect Lib "user32" (ByVal hwnd As Long, lpRect As RECT) As Long
Private Declare Function ClientToScreen Lib "user32" (ByVal hwnd As Long, lpPoint As POINTAPI) As Long
Private Declare Sub Sleep Lib "kernel32" (ByVal dwMilliseconds As Long)
Private Declare Function SetCursorPos Lib "user32" (ByVal X As Long, ByVal Y As Long) As Long
Private Type POINTAPI
X As Long
Y As Long
End Type
Private Type RECT
Left As Long
Top As Long
Right As Long
Bottom As Long
End Type
Dim SelWnd As Long
Private Const SWP_NOMOVE = 2
Private Const SWP_NOSIZE = 1
Private Const flags = SWP_NOMOVE Or SWP_NOSIZE
Private Const HWND_TOPMOST = -1
Private Const HWND_NOTOPMOST = -2
Private Type BITMAP
bmType As Long
bmWidth As Long
bmHeight As Long
bmWidthBytes As Long
bmPlanes As Integer
bmBitsPixel As Integer
bmBits As Long
End Type
Private Type BITMAPINFOHEADER
biSize As Long
biWidth As Long
biHeight As Long
biPlanes As Integer
biBitCount As Integer
biCompression As Long
biSizeImage As Long
biXPelsPerMeter As Long
biYPelsPerMeter As Long
biClrUsed As Long
biClrImportant As Long
End Type
Private Type RGBQUAD
rgbBlue As Byte
rgbGreen As Byte
rgbRed As Byte
rgbReserved As Byte
End Type
Private Type BITMAPINFO
bmiHeader As BITMAPINFOHEADER
bmiColors As RGBQUAD
End Type
Private Const DIB_RGB_COLORS = 0&
Private Const BI_RGB = 0&
Dim Versii As String
Dim stat(9) As Long
Public Sub MMSetCursor(X As Long, Y As Long)
Dim mousexy As POINTAPI
mousexy.X = X
mousexy.Y = Y
ClientToScreen SelWnd, mousexy
MouseMoveSmooths mousexy.X, mousexy.Y
End Sub
Public Function GetHP()
'Tää oli ennen GetHit
Dim mouseyx(9) As POINTAPI
Dim I As Long
For I = 0 To 9
mouseyx(I) = FindBitmapMask(stat(I), SelWnd, 5, 8, 647, 206, 654, 216, 0)
Select Case mouseyx(I).X
Case Is <> -1:
Number = I
End Select
Next I
For I = 0 To 9
mouseyx(I) = FindBitmapMask(stat(I), SelWnd, 5, 8, 655, 209, 663, 220, 0)
Select Case mouseyx(I).X
Case Is <> -1:
number2 = I
End Select
Next I
If number2 = 0 And mouseyx(0).X < 0 Then number2 = ""
GetHP = Number & number2
End Function^ Toivottavasti joku jaksaa etsiä virhettä :D Kiitos!
stat on taulukkomuuttuja, joten sitä ei voine pistää ByRefinä funktioon (en ole VB-koneella nyt). Kokeile tehdä tämmöinen muutos:
Public Function FindBitmapMask(ByVal SBitmapDC As Long,
ByRef lähettää muuttujan sellaisenaan. Jos arvoa muuttaa funktiossa, se muuttuu funktioon syötetyssä muuttujassa.
ByVal lähettää muuttujan arvon. Arvoa voi muuttaa funktiossa sen vaikuttamatta funktioon syötetyssä muuttujassa.
ByRef on oletusasetus.
Esimerkki tästä, pastea formille ja lisää nappula:
Sub Esimerkki1(ByRef Testi As Boolean)
Testi = True
End Sub
Sub Esimerkki2(ByVal Testi As Boolean)
Testi = True
End Sub
Private Sub Command1_Click()
Dim Kokeilu As Boolean
Kokeilu = False
Esimerkki1 Kokeilu
MsgBox "Esimerkki1: " & Kokeilu
Kokeilu = False
Esimerkki2 Kokeilu
MsgBox "Esimerkki2: " & Kokeilu
End SubSain jo toimimaan muuten. Piti siirtää moduuleista funktioita form1:seen.
Hmm... kappas, huomasinpas sellaisen asian myöskin, että olit määritellyt POINTAPI:n Privatena Formissa. Siksi siirto moduulista formille todennäköisesti auttoi. Eli siis yksinkertaisin ratkaisu ongelmaan olisi ollut poistaa POINTAPI Formista.
(Ja tosiaan, noin suuren koodimäärän sumpliminen ei ole sitä hauskinta hommaa.)
Merri kirjoitti:
Eli siis yksinkertaisin ratkaisu ongelmaan olisi ollut poistaa POINTAPI Formista.
Formin omat funktiot eivät olisi sen jälkeen toimineet. Ja tossa ei todellakaan ollut kaikki koodi. :D
Mikseivät olisi? Olet määrittänyt moduulissa POINTAPI:n julkiseksi (Public). Tämä tuo POINTAPI-tyypin kaikkialla ohjelmassa käyttöön, jolloin sitä ei tarvitse olla erikseen esim. jokaisessa muussa moduulissa, formissa ja luokkamoduulissa joka sitä käyttää.
Aihe on jo aika vanha, joten et voi enää vastata siihen.